*Please read my TOU*

I am using the beautiful art of © Suzanne Woolcott
You can purchase this art HERE
Please do not use the same tube unless you have a valid license!

SUPPLIES

This beautiful kit is called Broken Hearted
by Stacey’s Designs
You can purchase this kit HERE

Mask tde_67 HERE
Filter – Mura meisters Copies

Lets Get Started!

1. Open a new white canvas 600×600
2. Open red and black frame, copy and paste as a new layer
3. Image, resize by 50%, image free rotate right 90°
4. Selection tool, set at rectangle, position at the top left of the Inner red paper
of your frame and drag to the bottom right
5. Open your tube and postion inside the frame
6. Selections invert, delete, select none
7. Add a drop shadow of 1,1,75,5 black to your tube and merge down to your
frame layer
8. Duplicate, close your top layer and highlight your middle layer
9. Effects, mura meisters copies set at
cards
circle
tile mode
behind
Number 8
Shift X 30
Shift Y 10
All else the same
10. Duplicate and mirror and reduce the opacity of your duplicated layer to 50
11. Un x your top frame layer and move it a little till your happy with
ts position
12. X out your backround layer, merge visible and un x it
13. Open a paper, I am using paper6, paste as a new layer under your frames
and resize by 80%
14. Layers, load mask from disk, find tde_67, source luminance, fit to layer, Invert
and hide all Checked
* This will make your mask touch the edges of your canvas, if you wish to make it
smaller change to fit to Canvas
15. load and merge group
16. Open doubleheartedcharm, paste as a new layer, drag to the top and resize by
20%
17. Position this on the top right of your frame
18. Choose a spiked flower, resize by 10% and place over the loop of your charm
19. Duplicate and move this one to the bottom left of your frame
20. Open heaartbreaker wordart, resize by 60% and add a drop shadow of
3,3,100,5 black
21. Move this above your frames
22. Add your correst copyright, name and watermark
23. Save and your done!

*Please read my TOU*

I am using the beautiful art of © Caron Vinson
You can purchase this art HERE
Please do not use the same tube unless you have a valid license!

SUPPLIES

This beautiful kit ‘Aged Beauty’ is from Tammy’s Scraps
Vintage Frames are also from Tammy xx
You can purchase both from Berry Bliss Scrapz

Mask HERE

Lets Get Started!

1. Open a new canvas 600×600
2. Open a paper, I am using paper11 and paste as a new layer
3. Layers, load mask from disk, find Mask 006, source luminance, fit to canvas,
hide all mask Checked
4. Load and merge group
5. Open Flower4 and paste as a new layer over your mask
6. Open Parchment Paper 1 and paste as a new layer
7. Open a heart gem, resize by 20% paste as a new layer and move to the top left
corner of your paper
8. Open the staple, resize by 60%, rotate by 45° and move to the top over your heart
9. Merge down and move under your flower
10. Choose a doodle, paste as a new layer and resize by 70% and move to the
right of your paper
11. Image flip, free rotate right 20° and move down
12. Duplicate, mirror and flip
13. Open your frames, I am using frame 6, resize by 46% and again by 60%, copy and paste as a new layer
14. Add a drop shadow of -1,0,100,16 black
15. Magic wand, set at add (shift), click inside your frame
16. Selection,modify, expand by 20
17. Copy your tube, highlight your doodle layer and paste as a new layer
18. Selections, invert, delete, select none
19. Merge down your frame and move it up a little
20. Choose a ribbon, I am using Lace Ribbon and Bow2, resize by 50%, free rotate left 9° and paste as a new layer
21. Move to the bottom of your frame and resize again by 70%
22. Move it to the right so the edges meet at the left
23. Use your eraser tool to erase the right edge of the ribbon hanging over the frame
24. Open the bead tag, shift+D to duplicate and close the original
25. Image rotate left
26.Text tool, I am using SweetheartScript-Limited size16, write out your name on the tag andmerge down
27. Resize by 60% and move to the bottom of your frame
28. Choose a butterfly, resize by 25% and paste as a new layer, move this down on top of your tag
29. Add your correct copyright,watermark,merge all flatten and resize
30. Save and your done!

*Please read my TOU*

I am using the beautiful art of © Jamie Kidd
You can purchase this art HERE
Please do not use the same tube unless you have a valid license!

SUPPLIES

This beautiful kit is called ‘SugarNSpice’ by Stacey’s Designs
You can purchase this kit HERE

Frame & Mask HERE

Lets Get Started!

1. Open a new blank canvas 500×600
2. Open Doodle2, resize by 40% and place to the left
3. Duplicate and flip. Go back to your original doodle and mirror it
4. Choose a paper, I am using paper9, copy and paste as a new layer
5. Layers, load mask from disk, find Ibelievemask, source luminance, fit to layer,
Invert mask, hide all mask Checked
6. Load, merge group and move under your doodle layers
7. Open your frame (The one supplied, or one from the kit) and paste as a new layer
8. Selection tool, set to rectangle, starting at the top left drag it to the bottom right
9. Open your tube, resize first, copy and paste as a new layer and drag under your frame
10. Selections, invert, delete, select none
11. Add a dop shadow of 0,0,75,5 #f76a88 to your frame and merge down to your tube
12. Effects, Xero, porcelain @ default settings
13. Merge down your top doodle layer so they are both on one layer, add a drop shadow and
apply the filter to these also then change the blend mode to Luminance legacy
14. Open butterfly, resize by 20%, paste as a new layer and move into postition (see tag for reference)
15. Add a drop shadow and repeat
16. Open PinkFlower1, resize by 15% and paste as a new layer onto the stem’s at the top
of the frame
17. Duplicate, mirror and add a drop shadow, change the color to black this time
18. Text tool, I am using ChopinScript, size 28, foreground #d77698, backround #797879
19. Type out your name, add your correct copy right and watermark
20. Save and your done!

*Please read my TOU*

I am using the beautiful art of © Jennifer Janesko
You can purchase this art HERE
Please do not use the same tube unless you have a valid license!

SUPPLIES

This beautiful scrap kit is called ‘Spa Detente’ by ChaDesignz
Visit to purchase this kit

Mask – Starburst HERE

Lets Get Started!

1. Open a new blank canvas 600×600
2. Choose a paper, I am using paper5, resize by 15% and paste as a new layer
3. Choose another paper, I am using paper7, resize by 10% and paste as a new layer
4. Image, free rotate right 45°
5. Effects,Reflection effects, kaleidoscope set at -50, -50, 90, -55, 12, 2, 3 Wrap ok
6. Highlight the first paper layer, select all, float, defloat, invert (highlight your top layer)
delete, select none
7. Merge down your top layer, Layers, load mask from disk, find Starburst,
source luminance, fit to layer, invert mask, hide all mask Checked
8. Merge group, duplicate and move them slightly apart
9. Open a frame of choice, I am using Image10, resize by 50% and paste as a new layer
10. Selection tool, set at rectangle, start at the top left of your frame and
drag to the bottom right
11. Open your tube, resize if you wish, copy and paste as a new layer and drag
under your frame
12. Selections, invert, delete, select none
13. Add a drop shadow of 0,0,100,15 black to your frame and merge down
14. Open a ribbon of choice, I am using Image25, resize by 29%, copy merged and paste under your tube layer
15. Image free rotate, left 45°
16. Open Image 37, resize by 60% and paste as a new layer on top of your frame
17. Use your eraser tool to erase the stem at the bottom so it looks like its
under the ribbon
18. Open a dragonfly, resize by 20% and paste as a new layer
19. Image free rotate right 40° and add a drop shadow
20. Text tool, Set your foreground to #5fc5d5 and your backround to #7f634d, I am using
WaterLily, size 30 and type out your name
21. Add a drop shadow of 1,1,100,2 black
22. Add your correct copyright and watermark
23. Merge all flatten and resize if you wish
24. Save and your done!

*Please read my TOU*

I am using the gorjuss art of © Susan Woolcott
You can purchase her art HERE
Please so not use the same image unless you have a valid license!

SUPPLIES

This beautiful kit ‘Starry Nite‘ is from the very talented Stacey
You can purchase this kit at Sweet n Sassy Digiscrappers

Lets Get Started!

1. Open a new white canvas 700×500
2. Open Star Mask and minimise
3. Open a paper of choice, I am using Palebluepatternpaper, copy and
paste as a new  layer
4. Layers, new mask layer from image, find Starymask, source luminance checked
5. Load and merge group
6. Add a drop shadow of -1,-1,100,0 #3e4d46 and resize by 120%
7. Open DoubleBlueRibbonFrame, resize by 30% and paste as a new layer
8. Image free rotate, left 90° and move to the right
9. Undo resize on your frame, resize again by 55%, copy and paste as a new layer
10. Move both into postion (see tag for reference)
11. Selection tool, set to rectangle, add (shift) drag from the top left of your TOP frame
to the bottom right
12. Select a paper, I used LightBluePatternPaper, copy and paste as a new layer
and drag under your frame
13. Selections, invert, delete, select none
15. Resize your tube by 75%, copy and paste as a new layer on top of your
paper
16. Add a drop shadow of 1,1,100,10 black
17. X out all layers except your large frame, paper and tube and merge visible
18. Highlight your smaller frame, selection tool, drag from the top left
to the bottom right
19. Copy your Image, paste as a new layer, drag under your frame, selections, invert
delete, select none
20. Merge down your frame to your image layer
21. Image, free rotate right right 20° and move this layer to the top
22. Change your back round layer to #7064ac and your foreground to #576a5d
23. Highlight your large frame and add a drop shadow of 0,0,100,20 back round color
shadow on a new layer CHECKED
24. Effects, texture effects, blinds, 5, 100, black, Horizontal and Light from left checked
25. Highlight you small frame, add a drop shadow but change the color to your
foreground color and add blinds
26. Open Flower2, resize by 15% and move to the bottom left of your top frame
27. Duplicate, mirror and flip and move to the top right
28. Highlight your mask layer, duplicate and move this layer to the top
29. Resize by 15% and add a drop shdow of 0,0,45,3 #576a5d shadow on a new layer
NOT checked
30. Duplicate and place to the right of your tube
31. Open Butterfly1, resize by 10%, copy and paste as a new  layer and move to the top
left of your large frame
32. Add a drop shadow of 0,0,70,3 black
33. Duplicate, image mirror, flip, rotate right 20° and place on your small frame at the bottom
left
34. Text tool (I swapped the colors in my palette first) I used Funky Tut NF, size 60 and
type out your name
35. Add a drop shadow of 2,2,100,3 black
36. Add your correct copyright and watermark
37. Merge all flatten, resize if you wish
38. Save and your done!

*Please read my TOU*

I am using the beautiful art of © Jasmine Becket-Griffith
You can purchase her art HERE
Please do not use the same tube unless you have a valid license!

SUPPLIES

This beautiful kit ‘For the Love of Lily‘ is from the talented Cindi
You can visit Cindi at Designs by Cindi
And purchase this kit at Memory Junkies (taggers size)
or Moo Two Designs (taggers and full size)

Filter – Mura Miester’s Copies download HERE

Masks – LSGemset164 & Decorativeq17 HERE

Lets Get Started!

1. Open a new white canvas 600×600
2. Choose a paper, I am using paper12, copy and paste as a new layer
3. Load mask from disk, find LSGemset164, source luminance, fit to canvas,
Use image value Checked
4. Load and merge group
5. Duplicate and change the blend mode of your top layer to burn
6. Merge down so both masks are on a single layer
7. Open a frame, I am using frame1, copy and paste as a new layer
8. Image resize by 50%
9. Add a drop shadow of 1,1,100,10 black
10. Selection tool, set at recangle, add, feather 0 and drag from the top left
to the bottom right of your frame
11. Copy your tube, resize first if need be and paste as a new layer
12. Drage under your frame, selections, invert, delete
13. Selections, select none and add a drop shaodw to your tube
14. X out your white (backround) layer and merge visible
15. Choose another paper, I am using paper13, copy and paste as a new layer
under your frame
16. Layers, load mask from disk, find decorativeq17, same settings as your first mask
17. Load and merge group
18. Use you eraser tool to erase the edge of the mask (see tag for reference)
19. Add a drop shadow to your mask layer
20. Highlight your frame layer, duplicate and highlight the Bottom layer
21. Effects, Mura Meister’s Copies, set at Cards, Circle, Tile mode, Behind
Number 8, Shift X 16, Shift Y 6, (all else the same) ok
22. Merge down your top layer, add a drop shadow and resize by 90%
23. Copy and paste Flowerbranch1 as a new layer above your mask
24. Copy and paste Flowerbranch2 as a new layer, image mirror
25. Add a drop shadow, but change the blur to 3
26. Open flower1, copy and paste as a new layer and resize by 20%
27. Plce in the bottom right of your frame, duplicate, image mirror and flip
28. Repeat for flower2 but resize by 15%
29. Merge down 3 times, so all your flowers are on one layer and add a dropshadow
30. Text tool, I am using Heidorn Hill, size 36, foreground #f26236, backround #9cc473
31. Type out your name and add a drop shadow. Repeat this but change your V&H to -1
32. Add your correct copyright, merge all flatten and resize your tag
33. Save and your done!

I hope you enjoyed this tut
Id love to see your results
distinctivelyauri@yahoo.com.au

**TWI Registered**

*Please read my TOU*

I am using the beautiful art of © Jasmine Beckett-Griffith
You can purchase her art HERE
Please do not use the same tube unless you have a valid license!

SUPPLIES

This stunning kit ‘Sweetness’ is from the lovely Cha
You can visit her at Cha Designz
and download this kit HERE

Frame is from  Scrap-digi de Tinette’s ‘Always Nalia’ kit
It is part of a cluster and its free too!
Download HERE

Mask -  178 HERE

Font – TK Doodle can be purchased HERE

Lets Get Started!

1. Open a new blank canvas 700×700
2. Selections select all
3. Choose a paper, I am using paper7, copy and paste into selection
4. Selections, select none
5. Layers, load mask from disk, find 178, source luminance, fit to canvas
and hide all mask Checked
6. Load, merge group and lower the opacity to 75
7. Open your frames, choose Cluster nini-lolo, resize by 15%, copy
and paste as a new layer
8. Add a drop shadow of 2,2,100,15 black
9. Add a new raster layer, drag to the bottom and floodfill white
10. Highlight your frame layer and using your free hand tool, set at point
to point, draw around your frame
11. Copy and paste your tube as a new layer (resize first if you wish)
and drag under your frame
12. Selections, invert, delete, select none
13. Highlight your frame layer and merge down
14. Open the butterfly, or any other element, resize by 40% and place around
your frame
15. Open the flowerheart, resize by 60% and place under your frame to the left
Duplicate, mirror and move into postion
16. Open flower3, resize by 70% and paste as a new layer under your mask layer
17. Add a drop shadow of 0,0,70,5 black
18. Duplicate, Mirror and flip
19. Change your foreground color to #5183a4 and your backround to #b599a5
20. Text tool, I used TK Doodle, size 36, type out your name and add a
drop shadow of 1,1,100,2 #202020
21. Add your correct copyright and watermark and resize your tag
22. Save and your done!

*Please read my TOU*

I am using the beautiful art of © Jennifer Janesko
You can purchase her art HERE
Please do not use the same tube unless you have a valid license!

SUPPLIES

This gorgeous scrapkit is called ‘Muted Whispers’
from Shhh Scrapz and you can purchase it from
Digital Chaos

Frame & Tag – This beautiful frame and tag are freebies from Smiloche’s
‘Alix Add on kit’
You can download them HERE

Mask – Mask108-border_by_nb2007 HERE

Lets Get Started!

1. Open a new white canvas 700×700
2. Open your Alix kit and choose a frame, I am using Frame2
3. Resize by 27%, copy merged and paste as a new layer
4. Choose a paper from the kit, I am using paper9, and paste as a new layer
under your frame
5. Layers, load mask from disk, find Mask108-border_by_nb2007
source luminance, fit to layer, invert transperency, hide all mask Checked
6. Load and merge group
7. View, rulers
8. Selection tool, set to rectangle, start at 300 and move all the way to the right
and drag to the bottom
9. Copy this then go to selections, invert, delete, select none
10. Paste as a new layer, Image flip and move this half of the mask over to
the left of your canvas (see tag for reference)Merge down your top layer
11. Add a drop shadow of 0,2,80,2 black
12. Add a drop shadow of 2,2, 100, 10 black to your frame and repeat
but change your V & H to -2
13. Selection tool, start at the top left and move to the bottom right so
your whole frame is selected
14. Choose anothewr paper, I am using paper7, copy and paste as a new layer
and drag under your frame
15. Selections, invert, delete. Do Not de select yet
16. Copy your tube, paste as a new layer over your paper, but under your
frame and delete again. Select none
17. Choose a tag from the Alix kit, I am using tag4, copy merged and paste
as a new layer under your frame
18. Resize by 60%, duplicate, mirror and flip
19. Open your frame again, Copy fleur3, and paste as a new layer
20. Resize by 27% and move to the top left of your frame
21. Highlight your mask layer and use your raster deform tool to squish
it in at the top and bottom so its under your tags
22. Change your backround to pattern and use a paper of choice, your
foreground to black
23. Text tool, I used Passions Conflict ROB, size 30, type out your name
24. Add your correct copyright and watermark
25. Save and your done!

*Please read my TOU*

I am using the beautiful art of © Jamie Kidd
You can purchase her art HERE
Please do not use the same tube unless you have a valid license!

SUPPLIES

This stunning scrap kit ‘Watercolor Sea’ is from the lovely Lynne
You can visit her at Baby Cakes Scraps
And you can purchase this kit HERE

Template – This beautiful template 21 is FREE to download from
Scraps of Enchantment HERE

Mask – Mask 193 & Brush – Butterfly Happiness HERE

Lets Get Started!

1. Open you template, shift D to duplicate and close the original
2. Delete the ©INFO layer
3. Highlight CIRCLESCALLOP Layer
4. Magic wand, set at add (shift), rgb value, click inside the circle
5. Choose a paper from the kit, I am using paper six, copy and paste as
a new layer
6. Selections, invert, delete, select none. Delete CIRCLESCALLOP layer
7. Highlight RECTANGLE1 and use your magic wand to click inside
8. Choose another paper, I used paper ten, copy and paste as a new layer
9. Selections, invert, delete, select none. Delete RECTANGLE1 layer
10. Highlight RECTANGLE2 and use your magic wand to click inside
11. Choose another paper, I used paper three, copy and paste as a new layer
12. Selections, invert, delete, select none. Delete RECTANGLE2 layer
13. Highlight CIRCLEBRUSH and use your magic wand to click inside
(you will also have to click inside the little swirl at the bottom as it is seperate)
14. Choose another paper, I used paper seven, copy and paste as a new layer
15. Selections, invert, delete, select none. Delete CIRCLEBRUSH layer
16. Image duplicate, image mirror
17. Add a drop shadow of 0,0,100,10 black to all your paper layers
18. Choose a butterfly, resize by 60% , paste as a new layer and add a drop shadow
19. Copy your tube and paste as a new layer. Add a drop shadow of 0,0,60,5 black
20. Open star ribbon, resize by 30%, highlight raster 3 on your canvas and paste as
a new layer
21. Move over to the left of the template bar and use your raster deform tool to stretch
it to the right
22. Add a drop shadow
23. Highlight raster 4 (your circlebrush layer), change your foreground to pattern and
choose a paper, I used paper ten, angle 0, scale 100
24. Add a new raster layer, find ButterflyHappiness, size 225 and click 3 times
25. Add a drop shadow if you wish
26.Choose another paper, I used paper nine, copy and paste as a new layer over your
white backround layer
27. Layers, load mask from disk, find Mask 193, source luminance, fit to canvas
show all mask Checked
28. Load and merge group. Lower the opacity to 70
29. Choose another paper, I used paper eight, change your froeground to black and
your backround to pattern and find your paper
30. Text tool, I used Jacoba, size 30, write out your name and place on raster 2 bar
31. Add your correct copyright and watermark, crop and resize your tag
32. Save and your done!

I hope you enjoyed this tut
Id love to see your results
distinctivelyauri@yahoo.com.au

**TWI Registered**

*Please read my TOU*

I am using the beautiful art of © Suzanne Woolcott
You can purchase her art HERE (Suzanne has left AMI!)
Please do not use the same tubes unless you have a valid license!

SUPPLIES

This gorgeous kit is called ‘Lilac Dreams’ by Honored Scraps
You can purchase this kit from Terminally Unique Designs

4 Tubes of choice

Lets Get Started!

1. Open a new white canvas 800×500
2. Open BeadedSwirl, resize by 80% and paste as a new layer
3. Move it over to the left, duplicate and mirror
4. Open Frame1, resize by 60% and paste as a new layer over your beads
5. Add a drop shadow of 3,-3,75,10 black
6. Choose a paper, Im using paper5, copy and paste as a new layer and
drag under your frame
7. Using your magic wand, set at add(shift)rgb value, click inside each
window of your frame (make sure you have your frame layer highlighted)
8. Selections, modify, expand by 18
9. Highlight your paper layer, selections invert and delete, select none
10.  Highlight your frame layer again and using your magic wand click inside
your left hand frame, expand by 18, choose your first tube and resize if you need too
11. copy and paste as a new layer, drag under your frame, invert selection and delete.
12. Select none and repeat for the next three frames
13. X out your back round and bead layers and merge visible, un x all
14. Open ribbonpin 1, resize by 20% and place in the right corner of your
frame
15. Add a drop shadow, duplicate and mirror
16. Open flowerswag, highlight your top bead layer, copy and paste as a new layer
17. Duplicate, image flip and move into postion
18. Add a drop shadow of 2,2,100,5 black to both flowers
19. Open Butterfly3, resize by 45%, paste as a new layer over your frame
20. Move to the top and add a drop shadow of 2,0,100,5 black
21. Text tool, I used Lavishly Yours ROB, size 48, type out your name
22. Add your correct copyright and watermark
23. Merge all flatten, crop and resize your tag
24. Save and your done!

I hope you enjoyed this tut
Id love to see your results
distinctivelyauri@yahoo.com.au

**TWI Registered**